The Importance Of Proper Roof Insulation

The Importance Of Proper Roof Insulation

Getting proper roof insulation is one of the best things you can do for your home. It can help you avoid energy loss as heat rises during the winter and keep cooled air from escaping during the summer.

Insulation is available in blanket and reflective forms and comes in a variety of materials, including natural and synthetic fibers, glass wool rock and slag wool, fiberglass, sleek foils, and rigid foam boards. Its optimal R-value depends on your climate. When in doubt, hire a professional Roofing Companies in Allen TX.

roof insulation

Insulation Increases Energy Efficiency

Imagine sitting in your home on a hot summer day and not having to crank up the air conditioning as high as it can go. That’s possible with insulation that works. Well-installed insulation reduces heat penetration into a building, lessening the workload of heating and cooling systems and significantly lowering energy consumption and related utility expenses.

The simplest way to increase your energy efficiency is by installing new roof insulation, but it’s important to know what type of insulation will best work for you. Spray foam insulation is a good choice because it creates a tight seal around leaks and cracks, and prevents pests and mold from entering your home. It also reduces the transfer of unwanted noise from outside to inside.

Blown-in insulation is another option. It’s easy to install and offers a wide range of benefits, including preventing the buildup of ice dams in winter and keeping conditioned air from seeping into uninsulated attics during warm weather. It also helps keep the temperature of a home consistent, decreasing the reliance on heating and cooling systems and reducing utility bills for years to come.

Insulation is available in a variety of R-values, which measure its resistance to heat flow. The higher the R-value, the more effective it is at reducing heat transfer and saving energy. A roofing professional will be able to recommend the right R-value for your home and climate.

Adding insulation to your attic is one of the most cost-effective ways to lower your energy costs and improve your home’s comfort level. It’s a wise investment that will pay for itself in lower utility bills and increased home value.

In addition to lowering your energy expenses, the proper installation of roof insulation helps protect your metal roofing from moisture damage, extending its life and improving the overall quality of your home. The Department of Energy estimates that properly insulated attics can save 10% to 50% on heating and cooling costs. It’s a smart investment that will continue to provide savings for years to come.

It Keeps Your Home Cool In The Summer

A well-insulated attic keeps your cool air in your home during the hot summer months and hot outside air out. This minimizes the need for your cooling system to run and it saves energy and money.

Insulation prevents heat from transferring between the attic and the rest of your home by using a combination of two principles: conduction and convection. Conduction is when thermal energy passes through materials, like the metal ladle you left on your oven burner. Convection is the process of heated air rising in your home and carrying the heat down into cooler areas.

During the winter, insulation prevents heated air from escaping the attic and transferring it to your living spaces. This helps to lower your heating bills significantly and makes the rooms in your house feel more comfortable during the cold winter months.

Many homeowners notice that one floor of their homes is much hotter than the other floors. This may be due to the stack effect where the heat from downstairs rises and collects upstairs, or because of a poorly insulated attic that allows warm outdoor air to penetrate the ceilings and walls of your home. Adding attic insulation and air sealing will prevent the flow of outdoor heat into your home and make it more comfortable for everyone in your family.

In addition to keeping your home cool, insulation also reduces noise levels by reducing the transfer of sound from outside and between different levels of your home. A quality insulation installer can install the best type of insulation for your home depending on the climate and roof design.

It is important to have your insulation tested periodically, especially if you live in an older home that was built before the 1990s or if you haven’t had the attic remodeled recently. It is possible that the insulation has become water-damaged or that the R-value of your insulation has fallen significantly since it was installed. In these situations, it is a good idea to replace your insulation with new blown or fiberglass insulation to get the maximum benefit from it.

It Prevents Ice Dams

Ice dams are ridges of ice that build up on your roof, preventing melting snow and rain from draining off the roof. They can leak water into the home, causing serious and expensive damage that often requires professional attention. Ice dams can also devastate gutters, loosen shingles, and tear off siding.

Keeping your roof properly insulated can prevent ice dams. Insulation helps to regulate heat loss from the house, keeping the roof surface cool and preventing snow melt and refreeze.

What causes ice dams? The heat from inside the home escapes into the attic through ceiling penetrations such as skylights, vents for clothes dryers and ductwork, and through wall cavities. This warms the underside of the roof deck and melts the snow on top of the roof, which runs down to colder areas such as the eave overhangs, where it freezes. This forms an ice ridge that prevents any further melting of the snow from draining off the roof.

The primary cause of ice dams is a poorly ventilated and insulated attic, but even when this problem has been addressed it’s possible to get a build-up of ice dams due to specific weather conditions. For example, a wind-blown accumulation of snow on the roof may be too heavy to melt all at once. Or, if the roof surface is warm enough to melt some snow, it will be quickly cooled by the sun and will re-freeze, creating a thick ice dam.

Hacking away at ice dams with a hammer or shovel is bad for the roof and dangerous. Instead, use a box fan in the attic to blow cold air against the underside of the roof and the ice dams. This will prevent the ice from melting and damaging the roof or your attic and will help to dislodge any existing ice dams that have formed. If this doesn’t work, or the ice dams are too large to break up by this method, it may be necessary to consult an experienced roofing contractor to remove the dams by cutting them off with a saw.

It Makes Your Home More Comfortable

Insulation can make your home more comfortable as it reduces the amount of energy needed to keep the house warm or cool. This will result in reduced utility bills and a more comfortable home for you and your family to live in year-round.

The main function of insulation is to prevent heat from escaping your home, but it can also help keep outside air from coming in as well. It’s important to have the proper R-value for your climate and roof type, and a professional can help you figure out what R-value is best for you.

If you’re unsure whether your home has enough insulation, there are several ways to test it. One way is to touch your ceilings, if they feel cold or damp, that means the insulation isn’t doing its job. If the ceilings feel warm and cozy, then that means the insulation is keeping the heat in your home.

Another way to tell if your home has sufficient insulation is by doing an energy test. When you turn on a light or other source of heat in your home, the temperature should rise until it hits the ceiling and then start to drop. If your home has adequate insulation, the temperature will stay constant at the same level throughout your entire home.

Without insulation, heat will escape through the attic and roof on hot days. The sun’s concentrated heat will raise the temperature of the roof and ceilings, making the rest of the house uncomfortable. With insulation installed, however, the attic space and ceilings will be insulated from the roof so that heat won’t escape or enter the house in hot weather.

There are many benefits to installing insulation in your home, especially with the increased use of solar power. Not only does it increase your comfort and save you money, but it can also protect your home from fires and insect infestations. Insulation can also keep moisture levels low, which will prevent mold and other fungus from growing in your home. The initial investment for the installation of insulation can pay off in the long run, as it will lower your utility costs and increase your home’s value and overall safety.

The Roof Repair Process

The Roof Repair Process
roof

Roof Repair NJ process is a little different for every roof, but it typically involves replacing damaged materials and ensuring they’re properly sealed. For shingle roofs, this usually means replacing cracked flashing or vent boot seals, as well as caulking or tarring areas that show signs of wear. First, the roofing contractor will perform an inspection. If there is a leak, they’ll identify the source. This can involve some detective work, as water from a leak can travel sideways and long distances.

Repairing Damaged Shingles

The shingles on your roof help protect your home’s interior from rain and sun damage. If one or more shingles become damaged, water can seep into the roof decking and cause serious problems. If left untreated, a leaky roof can lead to water damage, mold growth, and pest infestations. It’s important to repair a damaged shingle immediately, or the water could penetrate the ceiling and walls and cause water damage and mold.

You should always try to replace a whole shingle instead of simply removing and nailing in a patch. This will prevent water from entering the roof, and it will also look better. First, locate the source of the leak: water stains on the ceiling or walls are good indicators. Then, walk around your house and inspect the roof. Find where the leak is coming from, and follow it to the damaged shingle.

Generally, a single shingle can be replaced by loosening the nails holding it in place. It’s a good idea to remove the nails from the shingles above and below the broken shingle, too. Next, lift the shingle with a flat pry bar and try to separate it from the roofing materials. If there is a shingle sealant underneath it, it may be hard to separate the shingle from the roof surface. If this is the case, loosen the shingle sealant with a putty knife or a flat pry bar. This can usually be done by sliding the pry bar along the edge of the shingle, near the nail.

If the shingle is still stuck, removing it will probably require a hammer and a plier. Be careful not to damage the functioning shingles above it, and make sure that the new shingle will cover the old nails.

Once you’ve removed the damaged shingle, replace it with a new one. To make the repairs, you should use a bundle of shingles that match your roof color as closely as possible. If there are any gaps or holes in the roof, you can fill them with a roofing patch kit, or cut and tear a piece of tar paper that is approximately 6″ wide and apply construction sealant around the edges to create a water-resistant barrier.

Repairing Damaged Flashing

Flashing is a thin sheet of metal that protects various parts of your roof, including vent pipes, chimneys, skylights, dormers and valleys. It is designed to withstand different weather conditions, but it can become damaged over time. Some common signs of damage include dents, cracks, and holes. These can cause leaks in your home and other problems. A professional roofer can replace the flashing and seal it properly.

In most cases, roof flashing is made of aluminum or copper, though it can also be made of other materials. It is designed to withstand weather and temperature changes. However, it can deteriorate or rust over time if it is not maintained properly. In addition, ice or snow can build up around the flashing and cause moisture to seep under the metal strips. This can lead to leaks in your roof.

If you notice any of these problems with your flashing, it is important to have it repaired as soon as possible. This will prevent further damage to your roof and can prevent water from entering your home. The first step is to remove the damaged flashing. This may require removing some shingles in the area of the damage to reach the flashing. A professional roofer will use a ladder with proper safety equipment to ensure that they do not fall or get hurt during this process.

Once the damaged flashing has been removed, a professional roofer will examine the structure of the roof and underlying flashing to make sure that no other repairs are needed. If the flashing is rusty or has small holes, they will repair these with roofing cement or other similar materials. The next step is to reinstall the flashing and shingle it. They will reinstall it in the same way that the previous flashing was fixed to the roof, using either nails or sealant.

Once the flashing and shingle are installed, it is a good idea to apply some additional roof coatings to prevent leaks in the future. A professional roofer will be able to recommend the best products to use for your roof.

Repairing Damaged Vent Boots

Plumbing vent boots are the rubber or metal collars that encase and seal the ends of pipe protruding from your roof. It’s essential to keep these in good condition to ensure your household plumbing doesn’t seep into the house through the roof. But like other components of your roof, the vent boots can get damaged, leaving you vulnerable to leaks and other problems.

The best way to keep an eye out for these problems is to regularly check your roof for any shingle tears or cracks, and look at the area around the vents for water damage. If you notice any of these signs, the vent boot is likely damaged and needs repair.

When it comes to vent boots, there are a few different options for repairs. One option is to apply silicone sealer directly to the old boot and then slide a new boot over it. This is a fairly inexpensive and simple solution, but it is not a permanent fix as the silicone may fail over time.

Another option is to replace the entire roof vent boot with a metal cap and flashing assembly. These are typically made of galvanized steel, cast iron or copper and cost between $50 and $80 per vent boot. These are more durable than the plastic boot, but they also have a shorter lifespan than the roof itself.

A more long-lasting solution is a permanent solution like the PERMA-BOOT, which is guaranteed to last for the life of the shingles and requires no shingle removal or roofing tar. However, it is more expensive than the other two options and should be considered a last resort if you cannot afford to replace the entire roof vent boot.

If you have the skills and equipment to replace a roof vent boot yourself, it can be an affordable solution to leaking plumbing vents. But you should always consider your safety first when climbing on a roof and leave this task to professionals if you are not comfortable doing it yourself. For a more durable and longer-lasting solution, you can also opt for lifetime pipe flashing assemblies that are usually made of lead or other heavy materials and are more expensive than the plastic and metal boots.

Repairing Damaged Decking

Decks suffer a lot of damage from the elements. Over time, they become stained and soiled, which can detract from the look of the house. Staining or resealing your deck can help it to keep its original beauty and stave off deterioration.

However, if the deck is rotting to the point of becoming unsafe, it may be necessary to replace it. It’s a good idea to have the structure professionally inspected before you begin any repairs.

A rotted ledger board (the long, pressure-treated wood that attaches the deck to your home) is usually the first sign of trouble. If it’s severely rotted or damaged, it should be replaced immediately to prevent the structural integrity of your entire deck being compromised.

Next, you’ll need to examine the rest of the deck. You can do a thorough inspection from the ground, but it’s also a good idea to get up into the attic or crawlspace and look around from there. Look for damp stains, discolored or sagging boards, and any signs of standing water.

If you’re able to see the joists and beams clearly, you can determine whether it’s possible to repair them or if replacement is necessary. If the joists or beams are badly rotted and soft to the touch, they should be repaired as soon as possible to prevent their collapse or structural failure.

Examine the underside of each rotting board for damage. If the rot is limited to a quarter of the board thickness or less, restoration should be feasible. It’s important that the new deck board be sized to span at least two joist spaces so that it can be fastened at both ends and one interim joist. Use a speed square and pencil to mark cutting lines on each end of the board as well as the joist’s centerline.

If you’re unable to restore the existing joists, it’s best to have them sistered together or replaced with new lumber. Install cleats or sister joists at each location where you’ve cut off a board and at any other locations that need reinforcement. Fasten them with framing nails or screws to the existing joist and to the joists or beams that they are being attached to. Cover each joist with Bituthene (r) or 3M 4200 to help the new lumber resist moisture.

How to Go About Roof Installation

How to Go About Roof Installation

Roofing installation is a big job that takes time to complete. You must hire reputable Johns Creek Roofers with experience in your chosen roofing materials. Ensure the contract has a 72-hour right to cancel, escrow, start and completion dates, payment schedule, warranties, and specifications. You should also check for dump fees.

roof

A roof is one of the most visible elements of a home and can make or break its appearance. Upgrading the roofing material can greatly improve a house’s overall appeal. But before deciding on what materials to use, you should consider the environmental conditions of your area. This will help you decide on a roofing material that can resist the harsh weather conditions of your region.

Asphalt shingles are the most common residential roofing material in the United States. They are lightweight, affordable and easy to install. They can withstand severe weather conditions and are warranted for 20 to 25 years. However, this type of shingle is not good for cold climates.

Tile roofing adds texture and elegance to your home’s exterior. Genuine clay or concrete tiles are long-lasting and noncombustible, but they can be expensive. A less expensive alternative is fiberglass or cementitious tiles that look similar to their genuine counterparts.

Metal roofing is another option. Galvanized iron, aluminum and terne plate are the most commonly used metals. Metal panels are soldered or welded together and are best for flat roofs. They are also designed to respond to thermal movement.

Membrane roofing is made from EPDM (ethylene propylene diene monomer), PVC (polyvinyl chloride) or other synthetic rubber. It is usually reinforced with fabric or coated with mineral granules. It can be loose laid or mechanically fastened to nailable or nonnailable decks. It is highly resistant to degradation from chemicals, ozone and ultraviolet radiation.

Underlayment

While much attention is given to the type of shingles, tiles, metal or other roof-covering material to be used, underlayment — which protects the roof deck before the actual roof-covering materials are installed — is just as important. The underlayment acts as a secondary barrier against leakage and moisture intrusion, providing protection between the roof deck and the final roof-covering material. In areas that are more prone to leakage or water intrusion, underlayment may be made of waterproof materials.

Underlayment is typically constructed of felt or a similar material, and it can be fastened to the roof deck using staples or plastic caps. Felt underlayment is often referred to as roofing felt, and it is available in many different thicknesses and grades. For example, thirty-pound felt is more resistant to tearing and damage caused during roof installation, which means that it will protect the roof deck longer. In high-wind areas, it may be advisable to use underlayment fastened with plastic caps instead of staples because they offer better resistance to wind damage.

Felt underlayment must be inspected regularly and repaired where necessary, particularly in areas where moisture can cause problems such as water leaks or condensation. It should also be inspected for signs of wear and tear, such as holes from a nail gun. In addition, it should be re-fastened to the roof deck as needed.

Another option for underlayment is a synthetic peel-and-stick membrane product, which usually includes a rubberized asphalt or butyl-based adhesive that’s mounted on a polyethylene carrier sheet. This type of underlayment offers some advantages over felt underlayment, including superior performance in low-temperature environments and greater flexibility on uneven surfaces. However, it can be difficult to install correctly. Like all roofing materials, it is essential that underlayment is installed in accordance with OSHA and other workplace safety standards. Workers should be equipped with fall protection devices and work shoes designed for traction on roofs.

Shingles

Once the sheathing and underlayment are in place, it’s time to start laying shingles. The process is a little different for every roofer, but most follow the same basic approach. First, lay a course of starter shingles that are designed for that purpose. These shingles are thicker than standard shingles, and their tabs overlap the shingle courses above them by about half an inch. Nail these shingles in a grid pattern, using four roofing nails per shingle as recommended by the manufacturer and extending the nails out over the eaves by about half an inch.

Next, install a piece of aluminum drip edge that is designed to protect the fascia board. It should sit flush with the bottom of the fascia board, with a half-inch gap between it and the gutter. A drip edge is especially important in cold climates, where ice can build up behind the membrane and shingle layers, and create an interior drip.

If you live in a particularly snowy area, it’s a good idea to install an ice and water barrier that is applied to the underside of all the shingle layers. This type of membrane can prevent ice dams from forming on the slopes of the roof, and help keep water shed properly.

Finally, it’s time to finish the roof with a cap of ridge and hip shingles. This step is a bit trickier, as the shingles must be bent to straddle the peak and shed water down either slope. This is usually done by hand with a shingle bender, and the result should be a clean, sharp peak that resists wind uplift. Also, the ridge should be flashed with metal step flashing that is at least 125 mm high and 125 mm wide (5”’ high and 5” wide). This helps prevent leaks around plumbing stacks and vents.

Flashing

A roof needs flashing to prevent water leaks and direct the flow of rainwater into walls. It is made of a flat, thin material and placed at important junctions where building materials intersect. These include roof hips and valleys, joints between the wall and the roof, and where the roof intersects with projections like chimneys, vent pipes, window openings, etc.

Flashing is a vital part of any roofing system, but it’s often overlooked or poorly or incorrectly installed during roof installation. This can lead to premature roof deterioration, water damage, mold and mildew, and pest infestations.

Roofers use several types of flashing depending on the location and extent of water sealing required. The most common type is a continuous piece of metal that carries rainwater down to the shingles below. This is called apron flashing. It’s also possible to use two-part flashing for some features such as chimneys. This allows the two pieces to flex as the home expands and contracts throughout different seasons, which can reduce the likelihood of breaks in the flashing.

Valley flashing is another type of flashing that helps to protect the area where a roof’s slopes meet. It consists of multiple overlapping pieces of flashing that resemble fish scales and is usually made of aluminum, although copper is a better option due to its durability.

Kickout flashing is used in the corners of a roof where the edge of a gable or dormer meets the roof. This bridges the gap between the step flashing and the gutter to keep out water, which can cause rot and other problems. To install it, a roofing professional must cut the metal to fit the shape of the corner, then bend it in a V-shape and fasten it with a nail or screw.

Ventilation

Ventilation is a key element in roof installation and helps extend the life of your roofing system. It also keeps your attic cooler in the summer and lessens the strain on your air conditioning. Without adequate ventilation, your attic can overheat and trap moisture that breeds bad-smelling mildew and mold. This moisture can damage the wood framing and sheathing and cause rot. If it drips onto a ceiling, it can damage the carpet and require expensive professional cleaning or replacement.

To ensure adequate ventilation, your roofing contractor will probably install a mixture of intake and exhaust vents. Exhaust-style vents like ridge and box vents take advantage of natural convection to move hot, stale attic air out of your home. However, they are only half of a good venting strategy. Intake vents in the soffit bring in cool, fresh air to help push the old hot attic air out.

Typically, a roofer will mark the spots for the vents with a nail and then use a saber saw to cut the holes into the attic underlayment and decking. They will then remove the shingles in the area around the marks and apply a flashing sealant to the underside of the vent flange on all sides. Then they will slip the vent flange under the shingles at the upper part of the hole and rest the lower part on top of the shingle.

Some homeowners opt to use turbine vents that include motors to power fans and create updrafts. These are generally used in attics that have low pitch roofs and need more ventilation than a passive system can provide. The installation process for these is similar to that of the static vents.

Preparing For Metal Roofing Installation

When properly installed, metal roofs are long-lasting and add much resale value to a home. They’re also energy-efficient, reflecting heat rather than absorbing it. Like a bookcase or desk assembled from a kit, it helps follow recommended instructions and installation details for your metal roof. This ensures that the project complies with local building codes and standards.

Preparing the Roof

Metal roofs are a great choice for homeowners who want to make their homes more energy-efficient. They are long-lasting and can greatly increase the resale value of a home. However, installing a metal roof can be complicated and should only be done by a professional. There are a few different ways to do this, and it is important to know what you’re getting into before starting the project.

If you do a roof overlay, the first step is to prepare the roof for the new metal panels. This means removing the old shingles, flashing and vents. Once you’ve done this, lay down a waterproof barrier to prevent moisture from getting under the new panel. Roofing felt paper will work well for this purpose.

metal roofing installation

Next, you need to build a grid that will support your new panel. You can do this by putting down 1 x 4 metal purlins. These will help give the panel the stability it needs and keep rain and snow from leaking into the home. You may also need to add additional supports if you have an extremely high pitched roof.

Once you have the grid ready, it’s time to start laying your new metal roof. Begin at the ridge and mark where the ridge cap will sit. Make sure it overlaps evenly on both sides and snap a chalk line to connect the marks. Run a strip of sealant tape along the ridge, up from the chalk line by the distance recommended by the manufacturer (typically about 1 inch). This will ensure that no water or debris can get under the roof panels or into the house.

You can then start on the less squared-off areas of the roof. Measure these sections and cut your panels with large tin snips. Be careful not to cut them too short, as they will be covered by flashing. Fasten the panels to the roof using #12 metal-to-wood screws.

If you’re doing a curved area, be sure to use a specialized arc flashing. You can purchase these online or from any roofing supply company.

Pre-Drilling

If you’re looking to replace your existing roof with something that will hold up better to storms and other weather-related damage, metal roofing is a great choice. It’s durable, doesn’t require much in the way of maintenance and can be insulated to make your home measurably more energy-efficient. If you want to install a metal roof overlay on your existing shingle roof, however, you have to do some prep work first.

Before you start tearing down the old shingles and putting up the new metal, it’s important to find a window of time when you can work without any rain possibilities. Then you need to make sure that the sheathing and the roof frame are in good shape, with no loose or missing nails. You can also lay down a layer of protective underlayment to protect the sheathing and help insulate the roof.

The next step is to pre-drill the holes in the sheathing where you’ll be putting the metal roof panels. This will help to prevent water leaks at the screw holes and allow the screws to seat properly. You’ll need to use a metal drill bit that matches the substrate of the roof sheathing as well as the size and type of screws you’ll be using. It’s a good idea to get an actual screw gun with adjustable driver settings and variable speed, since these are more likely to match your needs and won’t cause you to over-tighten the screws, creating a potential leak site.

Once the sheathing has been drilled, you can begin installing the metal panels. Place the first sheet on the roof and align it with precision perpendicular to the edge of the sheathing, then run neoprene washer-head screws at 12 in (30 cm) intervals. Continue this process for the rest of the roof, overlapping each panel by at least 1 in (2.5 cm). Once the whole roof is covered with metal panels, you’ll need to install the ridge cap.

This is an advanced DIY project, and it’s best done by a pro who specializes in the style of metal roof you’re using. If you choose to hire a professional, make sure they’re insured and have experience in installing this kind of project. Also, they should have the proper fall protection equipment that is specifically designed for working on the roof.

Putting the Panels into Place

Before your contractor begins installing metal roof panels, they should lay out a flat area on the ground for material storage and vehicle parking. This can prevent tripping hazards as the installers work, and it will make the cleanup process easier once they are finished for the day. It is also important to give the installers access to a dumpster and a power supply for their tools and equipment. It is best to use different outlets for the various tools to avoid tripping breakers all day. Metal roofing panels and trim have sharp edges, so only trained installers should handle them.

The first step of metal roofing installation is to place the foam closure strips along the eave. These strips are shaped to fit the corrugated underside of each panel, and they keep bugs and water from getting underneath the metal. Next, run a strip of butyl tape over the seams where the panels overlap or join each other. Caulking can be used instead of butyl tape, but it is important to follow the manufacturer’s instructions for proper installation.

Once the sheathing is secured, it’s time to begin adding the metal panels. Begin with the peaks of the largest squared sections of the roof, taking care that each panel overhangs the edge at least 3/4-inch. Overlap between panels is important to keep the roof from leaking and to provide a long-lasting, weatherproof barrier.

Cut the panels to size, if needed, using a circular saw with a metal-saw blade or large tin snips. Make sure that the non-vertical edges are covered by flashing to protect against rain. Once the panels are in place, fasten them to the sheathing with neoprene washer head screws. The screw gun should be set at the correct torque setting to avoid over-tightening, which can cause damage and rust.

If you choose a roofing system with exposed fasteners, you will need to regularly replace the fasteners as they wear out over time. To reduce this maintenance, many homeowners choose concealed fastener panels. These can be installed over solid sheathing or on a wood batten grid, and they eliminate the need for exposed fasteners.

Finishing Up

Before the new metal roof goes on, it’s time to remove the old shingles. A full tear-off is preferable, because this allows the sheathing and flashing to be inspected (and repaired if needed) before the installation begins. It also reduces the chances of a leak in the future.

Once the sheathing and flashing are in good shape, you can install your new roofing panels. Make sure to follow the manufacturer’s instructions for the product you choose. This will ensure that you don’t void any warranties and may help you avoid problems in the future.

Metal roofs can be made from a wide variety of materials, including tin, steel, aluminum, and copper. They can be fabricated into corrugated, modular, or standing-seam panels. Most metal roofs have a long life span, and are highly resistant to fire, wind, and water. They are also a more energy efficient choice than other roofing materials, and can help you save on your utility bills.

Most manufacturers provide detailed installation guides for their products. They include information about the product, applicable industry standards or testing, maintenance, warranties, hemming, and other important details. Using these documents as frames of reference will ensure that the installation is done correctly and weathertight.

When installing metal roofs, it is also necessary to use high-quality roofing sealant. This can help keep water and ice from entering the home, and prevent any rust or corrosion down the road.

If you have any questions or concerns about a new metal roof installation, it’s always best to contact a professional. They have the knowledge and expertise to get the job done right.

Metal roofing is an excellent option for many homeowners because of its durability, longevity, low-maintenance cost, and energy efficiency. It is highly reflective and helps keep the house cool in the summer, while keeping heat in during the winter. It’s an especially smart option for areas with severe weather conditions, as it can withstand heavy winds, hail, and snow. In addition, metal roofs can lower insurance rates and often come with 50-year warranties. Although DIYers can install a metal roof, it requires a good amount of experience and special tools.

Roof Repair And Roof Shingles

Roof Repair And Roof Shingles

One of the least expensive and fastest fixes for a leaking roof is often to replace the damaged shingles. Even a small leak can damage a house if left uncorrected. Luckily, roof repair jobs are far less costly than a complete roof replacement. It’s important to determine where the leak comes from before undertaking any roof repair work. Certain weather conditions can lead to leaks. Damp spots may be the culprit.

Roofing Services

Kent Roof Repair will provide a detailed estimate on roof repair work. Include equipment or supplies, such as power saws or a wrecking ball. Inspecting the roof’s integrity should be completed before any work is started. Look for any evidence of insect infestation or deterioration. If leaks are found, they should immediately be repaired. A qualified roofing contractor will know the best solutions for all roofing problems.

There are a number of different things that can contribute to roof leaks. Over time, some materials will become slightly brittle, especially if exposed to rain and snow excessively. This can be exacerbated by shingle replacement. Another possible cause of leaks is when roof repair is needed due to age or structural damage. The best way to avoid these kinds of roof repair complications is to address any potential issues early.

Because roof repair is one of the most expensive types of home repairs, it is essential to choose a company that has experience and is a member of a reputable roofing association. Reputable contractors will have at least six years of experience in roof repair. When hiring a roof repair specialist, be sure to request a written estimate that details exactly what will be done, including fees and the length of time needed to complete the job.

Sometimes roof repair requires removing shingles or replacing damaged sections. Whether this is the case depends on the severity of the damage, which is why it is important first to get estimates for the total cost of the project. Also ask the roof repair contractor to provide photos of previous jobs they have done for clients who are also considering the same roof repair project.

In most cases, roof repair consists of finding the source of a small leak, fixing it and then restoring the pitch to its correct level. When a small leak is corrected, the rest of the roofing contractor’s work is more often than not complete. However, when a small leak continues unabated, roof repair professionals may have to perform seepage testing or other specialized repairs to make sure the area remains dry. This prevents the risk of additional structural damage if water penetrates through the weakened area.

Some roof repair contractors offer shingle replacements as a service. If this is something you want to pursue, it is important to choose a licensed and certified provider. It is always a good idea to check references before hiring a contractor to handle such a task. Asking for a price estimate is also a good idea. This will help you compare prices offered by different contractors and ensure that you end up with a fair price.

Roofing contractors usually use one of three types of roofing materials – aluminum, asphalt or metal. Each one has its advantages and disadvantages. For example, aluminum shingles are cheaper when it comes to installation and maintenance, but can easily be punctured when heavy rains occur. Asphalt shingles are usually the best choice because they do not have the tendency to leak, but they tend to be pricey when it comes to installation and maintenance. Metal roofing materials, on the other hand, are durable and flexible, but they can be easily punctured during heavy rains.

When making repairs to roofs, roofing experts are skilled at locating trouble spots. While the average homeowner is capable of performing some roof repairs, it is much more challenging for them to know where to start and what materials to use to fix the leak. It might be even more challenging and expensive for a homeowner to attempt to fix a leaky roof without using roofing materials that are made to do so. When roofing experts are hired, the task can be finished much more quickly and effectively.

How to Tell If Your Home Needs a Roof Replacement

How to Tell If Your Home Needs a Roof Replacement

One sign that your roof needs to be replaced is the appearance of water spots on your ceiling. These spots can appear in small areas or be recurrent. Leaks are most noticeable during heavy rains, and the water typically drips along flashing. Visual damage can also be the result of recent high winds or storms. Luckily, there are many ways to identify the need for roof replacement. Read on for some helpful tips. And remember: the most important thing to consider is how much you can afford to spend on a roof replacement.

Roofing Services

Getting your roofing materials delivered to your home is an important first step. A roofer will need to protect your property while they are working. Once they’ve finished the project, they’ll carefully clean up and inspect the new roof. Once the job is completed, you’ll receive a warranty and a certificate of completion. And if you need additional work, roof replacement is often the best choice for a home improvement project. So, get your roof replacement done in the best way possible.

Another factor that affects the cost of a roof replacement is its labor. HomeAdvisor says labor accounts for over 60% of the total cost. If you plan to complete the job, it may cost you $5036. While you’ll save money by saving money on labor, partial replacement will not prolong the life of the old section. Instead, you should hire a professional roof replacement service to complete the job. However, check the reputation of the company you’re considering.

If you’re planning on selling your house, a new roof can help your property’s appeal. Experts agree that homes with newer roofs are more attractive to potential buyers. A new roof will also prevent you from having to pay for roof repair in the future. While it’s best to decide your roof replacement before selling your home, it’s not necessary to wait until it’s too late to make the decision. If you’re considering a new roof, you’ll be glad you did.

The cost of the whole new roof is significantly higher than a simple patch job. With a new roof, you can enjoy better sealing and the latest underlayment and flashing materials. Additionally, a new roof is guaranteed to last for twenty years. However, you can opt for a partial roof replacement. Depending on the condition of your existing roof, you can apply a new layer of roofing over the old one. Make sure to use strong decking when replacing your roof. This will help to hide the difference between the old and new roofs.

Once you’ve chosen a roofer, you should schedule an appointment with them. They should inspect your roof and provide an estimate. This estimate should include a breakdown of expenses, discuss any areas that need attention, and a rough idea of when the project will begin. Lastly, make sure you check their credentials and ask them questions about your roofing project. If you notice a hidden damage, make sure to ask the contractor. If you discover hidden damage after the work begins, you’ll have an opportunity to amend your budget or agreement.

Roofing materials are another major factor when it comes to price. Clay and concrete tiles add an interesting texture to your roof and look great on Spanish-styled homes. Although they are pricey, they are extremely durable and require specialist installation. Clay tiles can range from $300 to $500 per square foot. Concrete tiles are less expensive and versatile than clay tiles. Before beginning your project, your roof replacement team will first remove the old roof. They will remove the old tar paper and plywood, leaving behind only a new layer of roofing material.

The cost of roof replacement varies depending on the type of roofing materials used and the amount of labor needed to install it. Prices depend on many factors, including the size and slope of the roof. The more curved your roof is, the more materials and time it takes to complete. Depending on your specific needs, different roofing materials may also come with different warranties and guarantees. The warranties offered by a roofing contractor are important factors to consider when evaluating the cost of a roof replacement.

Ensure that the roof is adequately ventilated. Inappropriate ventilation can cause problems like mold growth and rotting materials. Proper attic ventilation can prolong the life of your roof and improve its energy efficiency. Unscrupulous contractors may not replace this crucial component. You may have to hire a professional to replace the roof in this way. However, it’s definitely worth the expense. 

Tips and Tricks For Roof Installation

Tips and Tricks For Roof Installation

If you’re considering roofing your home, it’s important to plan carefully and choose the right materials. You’ll also need to protect the items in your home and prepare for the installation process. This article provides you with tips and tricks for the roof installation process.

Roofing

Getting a new roof can increase your home’s value. It also keeps the interior of your home protected from the elements. Some signs that you need a new roof include mold and deterioration of your home’s structure. But if you need clarification on your roofing needs, check with professionals.

Preparing for a new roof. The first step in preparing for a new roof is to check the quality of your current roof. If it’s old and damaged, you could be looking at a lot of work. A new roof will provide peace of mind for years to come.

There are many factors to consider when preparing for a new roof. From the materials to the cost, it’s important to know what you’re getting into. You’ll also need to keep an eye out for signs that you may need a new roof. As for materials, there are several options to choose from. Depending on the climate of your area, you might need to switch to more durable or aesthetically appealing materials.

Choosing the right materials. The material that you choose for your roof can drastically affect the look of your home. It can also affect its durability and cost. You want a strong enough roof to withstand Mother Nature’s elements for years.

Roof materials come in different styles and textures, and some are more attractive than others. Your roof should match the style and architecture of your home. In addition, you want to consider how often you plan to maintain it. Before you select the right material for your roof, consider the climate in your area. Some materials are better for colder or warmer climates. Materials that reflect sunlight can improve the energy efficiency of your home.

Asphalt shingles are the most popular choice. They are relatively inexpensive and easy to install. However, they can trap heat, and they are not the best choice for homes in areas where wildfires are a threat.

Metal roofs are an attractive option. They are durable and can last 30 to 50 years. Aluminum and steel shingles are a great choice, and metal roofing can be fabricated to look like traditional materials.

Drip edges are an important part of any roofing system. They help to prevent water from leaking under the shingles and into the fascia. This allows water to run off the roof and into gutters instead of rotting the fascia board or causing damage to the home.

Drip edges are an inexpensive way to add value to your home. However, it is essential to install them correctly. If not, you may end up with a leaky roof and structural problems in your attic. When installing a drip edge, start by removing any shingles from the lower portion of the roof. Then, cut the drip edge along a plumb line. Be careful not to cut too far.

Next, nail the drip edge to the ridge. Nails should be placed every 12 inches. In high wind areas, it is recommended that the nails be placed 4″ on center. Once the drip edge is installed, it is advisable to use an ice and water shield. This will help to protect your home from ice dams.

Protecting items from dust and debris. Roof replacements can produce a lot of dust and debris. You’ll need to protect your items, as well as other property, from the damage. There are several ways to prevent dust and debris from causing problems.

One way to ensure that you’re protected from construction dust is to install a dust and debris containment system. A good dust and debris containment system will collect lightweight particulates and keep them from escaping. It can also help prevent water infiltration during the tear-off process.

Before work begins, make sure you cover the floors of your home and the garage with protective sheets. If possible, you should move your car out of the driveway or parking area and into your garage. This will keep your vehicle from getting tangled in the construction site. Then, you can cover the doors and windows with drop cloths.

In addition, if you have a suspended ceiling, you’ll need to be careful when removing it. You can help protect your items by placing a plastic covering over the attic ceiling.

What are the Different Types of Roofing?

What are the Different Types of Roofing?

Whether you’re a residential or commercial property owner, it is important to have good-quality roofing. There are a variety of choices when it comes to roofing, such as metal, membrane, composition shingles, and more. These options will depend on the style and needs of your building.

Roofing

There are a variety of types of composition shingles available. These shingles are composed of man-made materials such as fiberglass, granules, and asphalt. They are also waterproof, fire-resistant, and resist algae growth. Visit the website to learn more.

These shingles are available in different colors. They are a popular choice for homeowners. They can be found in black, gray, blue, and brown. They can be easily installed.

The materials in composition shingles are a mixture of asphalt and ceramic granules. These shingles can be laminated or in single layers. The cost of composite roofing is usually less than that of asphalt shingles.

The lifespan of a composition roof depends on many factors. A properly ventilated attic can extend its lifespan, as can regular roof maintenance. The newest composition roofs are also solar-efficient. This allows them to reduce the need for re-roofing.

Choosing the right shingle is a major decision. You will need to consider the style of your home and your budget. Then you will need to decide whether or not you want a synthetic or wood shake style of shingle.

Metal roofing is available in a variety of styles and colors. It’s a popular choice for homes and commercial buildings alike. The most common materials are steel and aluminum. However, copper is also a strong contender.

In addition to being long-lasting, metal roofs are also low maintenance and recyclable. Simple annual cleaning is all that’s needed. The material is also resistant to mildew, insects, and rot.

Metal roofing is ideal for locations with tropical weather. In fact, many insurance companies offer reduced rates to owners of metal roofs.

While the benefits of a metal roof are many, there are some downsides. A common misconception is that they’re noisy. While this is not the case, a few loud gusts of wind or heavy rain can cause dents or scratches.

If you’re considering metal roofing, it’s a good idea to hire an experienced roofing contractor to do the work. Most contractors will quote you the materials plus the labor.

Membrane roofs are a great way to make your roof watertight. They can be installed on a wide range of roof types, including flat and low slopes. They are also easy to install, making them very popular. However, there are a few things to keep in mind when choosing a membrane for your roof.

Membrane roofing systems can be built using synthetic rubber, thermoplastic, or a combination of both. In general, thermoplastic membranes are stronger than thermoset membranes, which use chemicals to cross-link the material.

EPDM synthetic rubber is one of the most common membrane materials. It is a single-ply membrane and can be easily installed. The material is known for its excellent weathering properties and resistance to UV degradation. The membrane is rolled out over the roof; then, it is hot air welded to create a secure bond.

Another membrane type is PVC, which is a strong, puncture-resistant material. It is ideal for warm climates and is very durable.

Roof decks are becoming more common in urban areas, as they provide a pleasant outdoor space and add to the value of a property. A number of different materials are used for roof decks. They include lightweight structural concrete, precast concrete, and cast-in-place concrete.

A precast roof is made from an assembly of hollow form planks, which are reinforced with normal-weight concrete. It is typically finished with a membrane and foam insulation.

Plywood is a popular material for roof decks because it is dense and less susceptible to rot. It also reduces the likelihood of warping and swelling. It is also more moisture-resistant than OSB.

The construction of a deck is determined by the type of roof system being installed. If you plan to use a permanent roof, you will want to consult a structural engineer. You may need to have your deck tested to ensure that it meets all egress and exit requirements. You can get design guides from various roof-cover manufacturers.

Types of Roofs and How to Install Them

Roofing Services

Roofs cover the top of a building and protect it from the elements. There are many different roofs, including flat, pitched, vaulted, and domed. The type of roofing material used depends on aesthetic and technical criteria. Learn about the different types of roofs and their properties. Choosing the suitable material for your roof will also depend on its shape and size. You may be surprised to learn that you can even get a roof that looks like a dome! Read on for some tips and tricks for roofing.

Roofing ServicesOverlays are another way to enhance the looks of your roof. The process of overlaying your roof is known as reroofing. Commercial Roofing Sacramento will install a new roof over an old one without tearing off the old one. However, it is essential to note that the entire process may only be done once. With this method, you can only install two layers of shingles over a roof. This method is often preferred because it prevents the shingles from curling.

When installing a roof, it is important to consider the type of shingles. There are several types of shingles, and each one has its benefits and disadvantages. While most people would prefer tearing off the old roofing, it is sometimes impossible. A method of reroofing involves removing existing roofing and replacing it with a new one. While it may seem tedious, the benefits of reroofing a roof are worth it.

One of the best options for reroofing is a less expensive option than total replacement. You won’t have to remove the entire old roof, which will reduce the cost and labor involved. Once you have the new roof, you can begin installing it. And, if you’re not replacing the roof completely, reroofing can be a great option because it doesn’t require a full tear-off.

Another type of roofing is called ply-roofing. This type of roofing uses several layers, including a protective granule layer. In most cases, the ply is the last layer, while asphalt roll-roofing requires big sheets of roofing material. As with asphalt, it’s important to use an asphalt primer that absorbs dust and improves the adhesion of self-adhering membranes. Also, the back surfacing of the shingles helps keep the shingles in place and protects the rafters.

The eaves and rakes of a roof are two other important components to consider when building a new roof. These two eaves and rakes will handle the water drainage and protect the roof against wind-driven rain. Once these parts of the roofing system have been installed, you can begin adding more layers of roofing material. It’s unnecessary to replace the entire roof, but it is still important to address leaks that may have developed in these areas.

Stone lintels have been used as roof supports since prehistoric times but cannot span a distance. The stone arch, meanwhile, was used extensively in ancient. The ribs of this form allowed it to span spaces up to 45 meters across. For about 2,000 years, stone arch structures were the primary roofing materials used in major architectural works. Then, during the Industrial Revolution, iron beams replaced stone arch structures. Paxton’s Crystal Palace was a great example of a stone arch structure.

There are also some common types of roofs. For example, the sod roof is an example of a green roof. Green roofs are popular for their insulating properties. It is also considered a way to “green” the Earth. The vegetation and soil act as living insulation, helping to moderate the temperature of a building. A roof with clay material can even serve as living space! If you choose this method, you should remember to research the construction process before starting the roofing project thoroughly.

Roofing is a crucial part of building a home, so choose the right one for your project. If you’re planning to install a new roof, you should understand the various roofing terms. Learn about the different terms, such as roofing pitch, roof deck, flashing, membrane, and underlayment. This knowledge can make the process much easier and more affordable. The best way to learn about your roof is to contact a roofing company in your area and have them evaluate your roof.

While it is easy to get confused about roofing materials, it is important to understand the different types. It would be best to understand that a roof’s type and quality would determine its cost. If you are looking for a low-cost roof, you may want to consider metal roofing. The low cost of this type of roofing is comparable to that of asphalt shingles. While metal roofing is light and durable, it can be noisy during rainstorms and dent if hit with hail.

How to Hang Christmas Lights Without Damaging Your Roof

How to Hang Christmas Lights Without Damaging Your Roof

’Tis the season to bring out the holiday decorations! Although decorating your home for Christmas each year can be an exciting tradition, it’s essential to keep the potential risks in mind. Christmas lights, for instance, can damage your roof if they’re not installed wisely. At the end of the holiday season, the last thing you want is to be faced with expensive roofing repairs—repairs that could have been avoided if you correctly hung your Christmas lights.

So, don’t rush to get all your lights strung up. Instead, make sure to go about the process carefully and with the following pieces of advice in mind.

Don’t use nails or staples

Sometimes, it can be tempting to use nails or staples to keep Christmas lights in place. This makes sense, on the surface—it is a secure option, and you can remain confident that your lights aren’t going to plummet to the ground when you least expect it.

Nevertheless, this sense of security isn’t worth it—especially as nails and staples aren’t the only way to securely fasten Christmas lights to your roof.

Consider putting aside the staple gun and nails this holiday season. It can be easy to accidentally staple or nail into your shingles if you have asphalt shingles on your roof. Whenever you puncture your shingles in this way, the holes you create can lead to severe problems down the line.

For instance, these holes can welcome water or moisture into your home. This can be an especially serious risk during the winter months—after a snowstorm, you don’t want the melted snow to flood directly into your home. This water can eventually damage the structure of your home. It could also lead to the development of mold or rot, which will cause a significant health hazard to the inhabitants of your home—especially if these inhabitants have sensitivities or allergies.

Well, then what’s the alternative? Rather than busting out the nails or staple gun, you can instead turn to clips that are specifically designed to hang Christmas lights. These aren’t difficult to get your hands on, and they allow homeowners to easily hang their lights while posing minimal risk to their roof’s integrity. There’s no reason to put holes in your roofing system.

Familiarize yourself with the kinds of plastic clips

On a related note, there is more than just one kind of plastic clip for you to choose from. Be sure to review each of the possibilities to ensure that you choose the best type for your particular roof and lighting style.


Christmas Designers

A few of the most common varieties of clips are:

All-in-one clips
Generally, all-in-one clips are the best option if you’re hanging lights from your shingles or gutters. That being said, it’s generally not a good idea to hang any lights directly from your shingles if this can be avoided. Shingles are a lightweight, often cheaper material, meaning that they’re more likely to be damaged or pulled out of place by your lights. Instead, try to position most (if not all) of your lights around the eaves and gutters of your home.Clay tile roof clips
As the name would imply, this is a clip designed for those with a clay tile roof. This way, you can minimize the risk of damage with a clip designed especially for your unique roofing material—even if it’s not the most common type.Eave clips
Whenever possible, it’s a good idea to hang Christmas lights from the eaves of your home rather than directly from the asphalt shingles. You can even purchase special clips that are designed specifically for this purpose.Clips for the ridge of your roof
You can also purchase another variety of clips explicitly designed for the ridge (or peak) of your roof.

Where to install your lights: gutter or shingles?

Rather than hanging your Christmas lights haphazardly across your home, be sure to put some serious consideration into the process. In particular, you can break the arrangement into two distinct sections: Lights that are best hung from the gutters and lights that you should be hanging from the shingles. Different kinds of lights can fall into one of these two categories, and it is vital to be aware of their ideal placement. Otherwise, you could be putting the safety of your roof at an increased risk.

However, if you don’t have gutters on your home, you can instead consider hanging lights from the shingles located along your roofline.

But what if you do have gutters? If that’s the case, then try picking up some icicle-style Christmas lights. You can break out the all-purpose clips and begin installing these lights along the gutters of your home.

Once you’ve sorted out where your lights will be hung, you can begin considering the arrangement and kinds of lights that look best on your home. Of course, every roof and home are different, so try working with whatever suits your property the best—as long as it is safely secured to your roof, of course.

Before you hang lights, clean your gutters

While it’s generally a good idea to clean out your gutters regularly, it is especially important to take care of cleaning before hanging up your Christmas lights. While this is an important step to take, it is also one that is often overlooked, as not everyone realizes how it relates to roof safety and hanging Christmas lights. In reality, they go hand in hand with one another.

Like most kinds of lights, Christmas lights are going to warm up. As the areas surrounding your lights grow warmer, this can cause debris to begin drying up. For example, if you have a large number of leaves piled up in your gutters, these can be dried out by your lights.

Ultimately, these dried-up leaves can create a preventable fire hazard. If the lights come into direct contact with the dried-up leaves, a fire can begin.

So, before you begin putting up Christmas lights (or, at least, before you’ve finished the job), remember to clean out your gutters, getting rid of any fallen leaves or debris. It’s also worth noting that cleaning out your gutters can offer other benefits to your roof and home, especially at this time of year. For example, if you are hit by snowstorms this winter, the melting snow will lead to a large quantity of water. Your gutters will then be responsible for diverting this water away from your home to prevent flooding or water damage.

However, leftover debris can lead your gutters to become clogged. If the water can’t flow freely away from the structure, it will build up in your gutters and leak or overflow. To minimize the chances of water damage during the winter, make sure to give your gutters a thorough cleaning before the start of the season.

Be careful (if you step foot on your roof)


Home Depot

It is often feasible to hang up all the Christmas lights you desire without actually having to step on the surface of your roof. Of course, this is the ideal scenario if you’re looking to prevent damage during the hanging process. But what if treading onto your roof can’t be avoided?

If that’s ever the case, you will need to remain as careful as possible—not only to ensure your safety but to protect the safety of your roof. Make sure that you are moving carefully across the surface to avoid loosening the granules that coat the surface of your shingles. These granules are there for a good reason—they help ensure the durability of your roof. Without them, your asphalt shingles will become far more susceptible to damage. Unfortunately, this can also decrease their overall longevity, leading you to need a replacement earlier than expected.

Still, be sure to prioritize your own safety. For example, if you aren’t confident climbing on top of your roof to hang Christmas lights, don’t do it. Instead, you could consider hiring a professional to hang your lights in your place—you don’t even need to sacrifice the arrangement or design you’d initially planned.

Protect and repair your roof with Able Roof

Homeowners across Central Ohio know who they can turn to if they’re looking to keep their roofs in peak condition: the roofing experts at Able Roof.

Before you begin hanging your Christmas lights this holiday season, consider having your roof inspected by one of the professionals at Able Roof. We can ensure that there’s no damage to your asphalt shingles, which could be further exacerbated by the light hanging process—even if you take all the precautions that we’ve listed.

If your roof has experienced damage, Able Roof is also prepared to take care of the repairs. If you need to have your entire roof replaced, we are also ready to take on the job with ease and efficiency.

Interested in learning more or getting started? You can visit our site to learn more about our roofing or gutter services, or you can request a free estimate today.

The post How to Hang Christmas Lights Without Damaging Your Roof appeared first on Able Roof.